top of page

Forum Posts

Salvatore Mendola
Aug 25, 2023
In ASK US ANYTHING
A Hull Test should be the first thing you do after finishing the build. Dont even try the throttle untill the Hull Test is done. If the Hull Test fails after following our instructions on the video here is a list if what to do in order when a Hull Test fails 1. Try a higher given current going up by 5A at a time. 2. Use second Hull Sensor. 3. Swap the blue and green Phase Wires. Blue to Green & Green to Blue. Attempt at different Given currents if needed starting at 10A. 4. Check all wires and connectors to make sure no wires pulled out or broken. 5. Swap blue & green wires on Hull Sensor. Pop out the pins on the motor side and swap position of blue and green. When doing this make sure your blue & green Phase Wires are also swapped. 6. If your just having a bad day then call me at 732-258-6808 and i will help you out 😉
1
0
33

Salvatore Mendola

Admin
More actions
bottom of page